Contact Info

 

CEL COMPONENTS S.R.L.

Via Cà dell'Orbo sud 4, 40055 Castenaso (BO) IT

Tel.: +39 051 782505 - Fax: +39 051 782477

info@cel.eu

To enlarge the map click on the Google's logo on the bottom left.

Quick contact

Name & Surname *

E-mail *

Subject *

Message *

Security check *

Write the numbers you see in the image

Contact us

Honeycombs and foams for sandwich panels » Aluminium Honeycomb  » Polycarbonate honeycomb » Polypropylene honeycomb » Nomex honeycomb-Commercial Grade » Nomex honeycomb - Aeronautical grade » Polyetherimide - PEI honeycomb » PVC Foam » Sandwich panels » Honeycomb Panel COMPOCEL® AL (FR) » SANDWICH PANELS FOR FLOOR APPLICATIONS » Honeycomb Panel COMPOCEL® ALP » Sandwich Panel COMPOCEL® ALF » Honeycomb Panel - ALUSTEP ® 300 - D » Honeycomb Panel - ALUSTEP ® 300 LIGHT » Honeycomb Panel ALUSTEP® 500 LIGHT » Pannello Sandwich - ALUSTEP® 500 SL » Honeycomb Panel - ALUSTEP® SL » Honeycomb Panel - ALUSTEP® INOX » Honeycomb Panel - ALUSTEP® F » Honeycomb Panel - ALUSTEP® FN » Honeycomb Panel - ALUSTEP® 1200 » Honeycomb Panel - POLISTEP » Honeycomb Panel - POLISTEP INOX » Sandwich Panel - PVC-STEP » Honeycomb Panel COMPOCEL® H (FR) » Honeycomb Panel - COMPOCEL® ALH » Honeycomb Panel - COMPOCEL® HP » Honey Panel - COMPOCEL® W » Honeycomb Panel - COMPOCEL® WP » Sandwich Panel - COMPOCEL® WF » Honeycomb Panel - COMPOCEL® VP » Sandwich Panel - COMPOCEL® VF » Honeycomb panel - COMPOCEL® LZ » Machines and plants » Honeycomb Expanders » Aluminium Powder » Adhesives and glues » ADHESIVE CPB 001 » Adhesive CPB 002 » Adhesive CPB 003 » Adesivo CEB001 » Vacuum Tables »

 

Two-Component Polyurethane Adhesive CPB 003 - Comp. A

Request for Quotation

 

Two component reaction adhesive for bonding rigid PVC, glass fibre reinforced plastics, steel and aluminium sheets to PUR, PVC and PS rigid foam.

 

Use
- Especially suitable for the manufacture of sandwich elements for the building industry and the manufacture of vehicles and containers
- Usable as levelling compound*
- Resistant to humidity and weathering
- Very good adhesive properties


* Please note technical information “Levelling compound*!

 

Processing - Processing temperature +15°C to +25°C

Preparation
The surfaces to be bonded must be clean, dry and free of grease. Metals must normally be pre-treated and possibly sanded Adhesion must be tested for compatibility by carrying out preliminary trials. The use of a suitable primer improves the bond strength and ageing characteristics, as well as resistance to hydrolysis. Surfaces of glass fibre-reinforced plastics must also be sanded. Resin and hardener must be fixed thoroughly with a stirrer (approx. 400 revs/min) until the mixture shows a uniform beige colour.

 

Two-component polyurethane adhesive CPB 003

 

 

Cleaning
Clean tools immediately after use. Cured adhesive can only be removed mechanically.

 

Special notes
Storage
Do not store below +10°C and for more than 12 months. Precautions
When processing CPB003 avoid direct skin contact with the uncured adhesive. Wear protective gloves.
Hazardous fumes may form when the product is heated or sprayed. Follow the Bulletins issued by the Association of Mutual Industrial Accident Insurance Funds.


Bonding
Apply adhesive evenly with a spatula or a doctor blade to the surfaces to be bonded and join them. The thickness of the adhesive layer depends on the properties of the materials to be bonded. The adhesive will cure without shrinkage.
When using CPB003 comp. A, the bond can be exposed to light strain after 8–12 hours. Final bond strength is reached after 24 hours.
High temperatures will shorten the curing time, low temperatures will lengthen it.
 

Safety
Please read our Safety-Data-Sheet and the labels of each product before use. Pay particular attention to the directions given in the Dangerous Substance Regulations. Make sure the safety data sheet is readily available as it gives valuable information regarding the safe usage and disposal of the product and what to do in the event of an accident involving the product.

Packaging units
5 kg drum of resin 10 kg drum of resin 30 kg drum of resin 300 kg drum of resin 1500 kg container of resin. Hardener on request, depending on metering equipment.

 
Technical data

Base Units Polyurethane, 2-components, solvent-free  
Hardener   CPB003  
Colour   Beige  
Consistency   Highly fluid easily brushable  

 

Density Units Polyurethane, 2-components, solvent-free  
CPB003 Comp. A   1.66 (resin)  
CPB0003 Comp. B   1.23 (hardener)  
mixture g/cm3 1.41 DIN 53 479

 

Viscosity Units Unità  
resin   30.000  
hardener   200  
mixture MPa•s 8000 Brookfield RVT

 

Mixing ratio Units    
resin : hardener units by weight 5 : 1  
resin : hardener units by volume 3.7 : 1  
Pot life min 60  
Hardness Shore D  min 60 DIN 53 505
  N/mm2 -20°C: ca. 24 DIN 53 283
  N/mm2 +20°C: ca. 18,5  
Shear strength N/mm2 +80°C: ca. 5,2  
Tensile strength N/mm2 18 DIN 53 404
Consumption g/m2 250-300 depending on substrate

 

Documentation to download

 
 


 

Two-component polyurethane adhesive CPB 003 - Comp. A

 

Processing
Processing temperature +15°C to +25°C

Precautions
When processing CPB003 Comp. B avoid direct skin contact with the uncured adhesive. Wear protective gloves. Hazardous fumes may form when the product is heated or sprayed. Follow the Bulletins issued by the Association of Mutual Industrial Accident Insurance Funds.

Safety
Please notice the indications on our EC-safety-data-sheets and the safety-indications on the labels of each product for the treatment of our products. Especially the directions of the Dangerous Substance Regulation have to be respected. Keep the EC-safety-data-sheet of the product you treat ready to hand. It gives you valuable indications for the safe usage, disposal and in case of accidents.

Cleaning
Clean tools immediately after use. Cured adhesive can only be removed mechanically

Special notes
Storage - Do not store at temperatures below +10°C and not for more than 12 months.

Packaging units - 1 kg cans 10 kg cans 30 kg cans 250 kg drums

 

Technical data

Base Colour
 
Units
 

Raw biisocyanatodiphenylmethane

Brunastro

Density  1.25 g/cm3 DIN 53 479
NCO content 31 %  
Viscosity 300 mPa•s (+20°C)  23°C, Sp. 3/50 Upm
Mix ratio Depending on the A-component  

 


For safety related data please refer to the safety data sheet!

Please note: All given data are based on careful examination in our laboratories and our past practical experience. These are non-binding indications. Given the high number of materials appearing on the market and the different methods of use which are beyond our influence and control, we naturally cannot accept any responsibility for the results of your work, also with regard to third party patent rights.
We recommend that sufficiently thorough tests be carried out to as certain whether the product described will meet the requirements of your particular case. Please also note our Terms of Sale, Delivery and Payment. This Product information replaces all previous issues.

 


Documentation to download

 


Liability disclaimer

The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.

CONTACTS

Dimitri 

Jessica 

Snejana 

Laura 

Elisa 

Alice