Two-component polyurethane adhesive CPB 001
Two-component polyurethane, filled, semi rigid, low viscosity, one-hundred percent free of solvents. Good adhesive properties, waterproof and resistant to mechanical stress.
Adhesive for materials of differing or similar properties.
Note - Different amounts per container can be supplied upon request
Temperature Range for application
+10 / +35°C
At lower temperatures and at high humidity levels the curing of the product will not be optimal.
• In hermetic bins at a temperature of 23°C, 6 months
• It is recommended to check for sedimentation in the containers before use, in case of sedimentation, remix.
• Avoid exposing to moisture and to prolonged contact with the air.
Tools/Equipment can be cleaned with suitable solvent, turpentine, nitric thinner or varnish remover.
The surface must be free of moisture, dust, grease, or oils.
|Specific weight at 23 ± 2°C||ASTM D 1475/60||g/ml||1,62 ÷ 1,65|
|Viscosity at 25 ± 2°C||ASTM D 2393||mPa∙s||15.000 ÷ 25.000|
|Specific weight at 23 ± 2°C||ASTM D 1475/60||g/ml||1,20 ÷ 1,25|
|Viscosity at 25 ± 2°C||ASTM D 2393||mPa∙s||350 ± 50|
Components A and B Mixed
|Pot life at 25 ± 2°C (200 cc A+B)||-||minutes||30 ÷ 35|
|Open time at 25 ± 2°C (thickness 1mm)||-||minutes||75 ÷ 95|
|Gel Time at 25 ± 2°C thickness 1mm)||-||minutes||170 ÷ 200|
|Minimum Temperature Application||-||°C||+10|
|Initial Hardening at 25°C||-||hours||8 ÷ 10|
|Time to reach full cure, 25 °C||-||days||5 ÷ 7|
|Coverage||-||g/sqm||150 ÷ 350|
Components A and B, final characteristics after full cure hasbeen reached
|Density at 20°C||ASTM D 792||g/ml||1,56 ÷ 1,58|
When working with polyurethane resins and other isocyanate hardeners, all regulations regarding hygiene and safety, glove use, safety
goggles, and suitable clothing must be strictly followed. Dispose of waste materials in accordance with the laws in force.
Do not release waste materials into the storm sewers. For further information, please see the material safety data sheet.
Documentation to download
The above data are to the best of our knowledge correct and are intended to give information about our products and their potential applications. No warranty is given or implied in respect of certain properties of the products or their suitability for a particular application. We reserve the right for technical changes without further notice. We guarantee impeccable product quality under our terms of sale.